This is amazing; it took very little time for that thread to become quite long, and it'll no doubt grow. Eric and his friend Steve are very brave, and also very generous to share their experience. The photos Eric shares show an incredibly complex machine. Some of his comments (perhaps revelations) are disturbing; for example, he suggests some parts of the printer require annual service. I don't know how a prospective buyer would ever learn that, as Epson certainly hasn't disclosed any such thing in its product literature. Whether it's true or not, it certainly raises some questions.
As my backstory article explains, I chose the 7900 when replacing my Canon imageProGraf in large part because of the cost of replacing the Canon's printheads, and the lack of certainty about their life span. Only time will tell if I made a wise choice, or if my reasoning was valid. That's what this blog is about: one person's long-term experience with one example of the machine.
Best of luck to Eric and Steve. We'll all know in a few days if their hard work and expense paid off.
--Jay
A long-term diary of working with the 7900.
Read the backstory behind this blog.
And a brief update to that article.
Saturday, January 28, 2012
Thursday, January 26, 2012
Another Driver Update (Mac Snow Leopard)
On 24 January Epson posted to the US site an update to the Mac driver for the 7900. This takes the driver from version 8.66 to 8.68. About this update, Epson says, "This version corrects a potential issue when using Auto Expand setting. Common Updater is not required with this driver." I've not yet used the auto-expand setting, which I think is for use when making borderless prints. The release notes also indicate this update is for OS X Leopard (10.5.8, specifically), Snow Leopard, and Lion. I use Snow Leopard, OS X 10.6.8. The download page includes installation instructions, pretty standard fare. There's no mention of a requirement to uninstall the previous driver, so I didn't. After installing the update and checking the version, I see this:
This is similar to what I saw after my update from 8.65 to 8.66 eighteen days ago. My original installation of the printer, back in October, 2011, was with the 8.65 driver. It appears I'll be reminded of that with each new update unless (perhaps) I remove (uninstall) the printer and then install it using the latest driver.
I'll be making some prints later today. These "point level" updates rarely have any obvious changes, and certainly offer no new features, so I don't expect to notice any difference.
--Jay
This is similar to what I saw after my update from 8.65 to 8.66 eighteen days ago. My original installation of the printer, back in October, 2011, was with the 8.65 driver. It appears I'll be reminded of that with each new update unless (perhaps) I remove (uninstall) the printer and then install it using the latest driver.
I'll be making some prints later today. These "point level" updates rarely have any obvious changes, and certainly offer no new features, so I don't expect to notice any difference.
--Jay
Wednesday, January 25, 2012
Printing for ME!
I've wrapped up my backlog of printing jobs and other client work. I have a show coming up around the middle of next month at a local gallery. I've selected the pieces I'll print for this, to add to the inventory of framed work I already have laid out for the exhibit, but I've simply not had time to do any printing of my own work.
Today I made one print, an assembly of three horizontal frames into a nearly square photo. As usual I printed a nozzle check, and found no clogs. The last clog was 3 January, 22 days ago, and was cleared by cleaning the appropriate nozzle pair. I've used the printer two days each week since 3 Jan, sometimes making a number of prints, other days making only one or two. During this period the relative humidity in the room has been between 36% and 40%, and somewhat cool, rarely over 62° F (17 C). The 7900 seems happy with that!
I made the print on a 13 x 19 inch sheet ("Super A3 / B 13 x 19 inch (sheet)" in Epson's terms) of EEF*. The sheet had a small flaw, a problem I've been seeing in the last few sheets of this paper I've used. EEF isn't cheap; small dark spots or other flaws in the paper are unacceptable. I've got 13 x 19 and 17 x 22 sheets in inventory; I've learned to check each sheet carefully before printing. I'm not alone in having this problem. I plan to contact Epson about it, as I know others have done. As things stand now, I'm unlikely to continue to purchase this paper. It's a shame; I love the surface, the print quality, and the fairly bright white of the paper. My other favorite "soft-gloss" paper, GGFS*, is much warmer in tone, but I find it works well for the majority of my images, and in several years of use I've found no flawed sheets.
In this case, because the image is about 12 inches (30cm) square, it was easy to set the top margin to 1.5 inches (4cm), which left a wide bottom margin which contained the flaw. It will disappear when I cut the sheet prior to matting it.
The LK* ink is still at 1%. With each print I make I'm prepared to install a new LK tank. I'll be making some large panorama prints tomorrow; given how long LK has been showing 1%, I full expect to replace that ink during tomorrow's printing.
--Jay
* See the "Shortcuts used" box in the right column.
Today I made one print, an assembly of three horizontal frames into a nearly square photo. As usual I printed a nozzle check, and found no clogs. The last clog was 3 January, 22 days ago, and was cleared by cleaning the appropriate nozzle pair. I've used the printer two days each week since 3 Jan, sometimes making a number of prints, other days making only one or two. During this period the relative humidity in the room has been between 36% and 40%, and somewhat cool, rarely over 62° F (17 C). The 7900 seems happy with that!
![]() |
| The arrow points to the flaw on the sheet, but it's nearly impossible to see at the size of this jpeg. The signature is only for this jpeg. I don't sign my prints like this! |
In this case, because the image is about 12 inches (30cm) square, it was easy to set the top margin to 1.5 inches (4cm), which left a wide bottom margin which contained the flaw. It will disappear when I cut the sheet prior to matting it.
The LK* ink is still at 1%. With each print I make I'm prepared to install a new LK tank. I'll be making some large panorama prints tomorrow; given how long LK has been showing 1%, I full expect to replace that ink during tomorrow's printing.
--Jay
* See the "Shortcuts used" box in the right column.
Tuesday, January 17, 2012
Clog-free For Two Weeks (And Counting)
I've been working on the art repro project I mentioned here in early January. It's been a large job, but its finally winding down. I've got one more painting to complete. I'm doing the photography—some of these are large paintings, requiring multiple exposures later stitched together—and then the Photoshop work to assemble the frames, make various corrections, and do the color matching. I'm not doing the printing. The paintings are oils on canvas, and I've no interest in printing on canvas. Mostly, I've no interest in coating the canvas, in dealing with that learning curve and the potential for generating scrap.
I am proofing my work by making small prints on mat (or "matte", for those who insist) paper. Getting the color right has been easy for some of these pictures, not so easy for others. Regardless, I've been making a fair number of proof prints before finally getting it right.
As usual, prior to making my first proof of the day, I print a nozzle check on plain paper. I print perhaps two or three days a week—never (so far) more than that. The last time I had to clear a clog was 3 January. That was in the Y channel, and was cleared by doing a Y/LLK pair cleaning. There's some consensus that temperature and relative humidity affects the frequency of clogs with these machines. My 7900 is in a room that's heated only when in use, so the temperature swings more than it would in a typical living space. With the heat on, the room is 65 to 70 degrees F (18 - 21 C). With the heat off it can drop as low as 56° F (13 C). When the printer is running, it's usually in the mid-60s. RH varies, too. The lowest I've recorded is 35%; I've seen it as high as 46%. I've only had the printer for a couple of months, those being wintery ones here. In summer that room will be a few degrees warmer. Our humidity levels typically drop, sometimes dramatically, in summer. I note the RH on my nozzle-check prints, so I'll be able to watch the trend.
The LK ink is still at 1%. Interestingly, the 7900 today showed the maintenance cartridge at 56%. Since the middle of December, that has varied from 49% up to today's reading. I've no idea how the printer senses that capacity, but I suspect it doesn't sense it at all. I think it's more likely a (rough, apparently) total of the amount of ink used in cleanings, in addition, in this case, to any waste ink from the initial set-up process.
I now have five inks below 20%, which means the printer's LCD, and the status display in the intuitively-named "Epson Printer Utility 4", are showing five ! marks for those inks.
There's always something flashing on this machine. If there's no paper loaded, the paper LED flashes. Unless the printer is asleep, in which case the LCD is blanked, the ! marks are flashing over the status bars for the inks below 20%. I use a large sheet of thin foam, from the original packaging of the printer, as a dust cover. The sheet is not opaque, but it does somewhat dim the flashing stuff, making it a bit less eye-catching when I enter the room.
I've been out doing some winter shooting lately (we've had a mini-irruption of snowy owls here in western Montana's Mission Valley—great fun!); with the repro job winding down, and other client work at a bit lower priority, I should soon have time to print some of my own stuff.
--Jay
I am proofing my work by making small prints on mat (or "matte", for those who insist) paper. Getting the color right has been easy for some of these pictures, not so easy for others. Regardless, I've been making a fair number of proof prints before finally getting it right.
As usual, prior to making my first proof of the day, I print a nozzle check on plain paper. I print perhaps two or three days a week—never (so far) more than that. The last time I had to clear a clog was 3 January. That was in the Y channel, and was cleared by doing a Y/LLK pair cleaning. There's some consensus that temperature and relative humidity affects the frequency of clogs with these machines. My 7900 is in a room that's heated only when in use, so the temperature swings more than it would in a typical living space. With the heat on, the room is 65 to 70 degrees F (18 - 21 C). With the heat off it can drop as low as 56° F (13 C). When the printer is running, it's usually in the mid-60s. RH varies, too. The lowest I've recorded is 35%; I've seen it as high as 46%. I've only had the printer for a couple of months, those being wintery ones here. In summer that room will be a few degrees warmer. Our humidity levels typically drop, sometimes dramatically, in summer. I note the RH on my nozzle-check prints, so I'll be able to watch the trend.
![]() |
| Printer status display on the Mac |
I now have five inks below 20%, which means the printer's LCD, and the status display in the intuitively-named "Epson Printer Utility 4", are showing five ! marks for those inks.
There's always something flashing on this machine. If there's no paper loaded, the paper LED flashes. Unless the printer is asleep, in which case the LCD is blanked, the ! marks are flashing over the status bars for the inks below 20%. I use a large sheet of thin foam, from the original packaging of the printer, as a dust cover. The sheet is not opaque, but it does somewhat dim the flashing stuff, making it a bit less eye-catching when I enter the room.
I've been out doing some winter shooting lately (we've had a mini-irruption of snowy owls here in western Montana's Mission Valley—great fun!); with the repro job winding down, and other client work at a bit lower priority, I should soon have time to print some of my own stuff.
--Jay
Sunday, January 8, 2012
Driver Update (Mac Snow Leopard)
In my previous posting I mentioned Epson had released updates for the 7900 driver, and also for the helpfully-named "Epson LFP Remote Panel 2" for Macintosh OS X 10.5, 10.6, and 10.7 (I use 10.6.8, Snow Leopard). I'd avoided installing those because I'd been working on some client jobs, things were working fine, and I rarely make changes in the middle of a job.
I've wrapped up those print jobs. I will be working on another later this week. I also need to make a couple of prints of my own work for a gallery show that will hang next week. So today I installed both updates. I did nothing but run the installers, hoping the old versions of the software would be found and replaced. That seemed to be the case with the Remote Panel 2 software; after installing, its version appears as 1.30, just as I expected from Epson's meager release notes. As for the driver, I'm really not sure. The previous version was 8.65, the update being 8.66. I ran the installer and then checked the version in the Mac's Print and Fax preferences panel. That still shows 8.65.
But checking Epson's "Printer Utility 4" (one could ask for more useful application names!), I get a mixed message as shown in the screen shot here. I have no idea what's up with Epson's versioning, and I have no idea what I've got after installing that update. Do I have 8.65? 8.66? Some weird hybrid, parts of each? Beats me. Epson, you could have done a couple of things here to help out. Installation instructions would be a good start. Just telling me whether the printer should be removed and then installed from scratch with the new driver, or to install the new driver "over" the old one, would have been sufficient.
Friend Dean, who runs his 7900 from Windows 7, warned that installing Epson's updates deleted any custom paper sizes he'd created. With that in mind I copied the information from the only custom sheet size I've created so I could reproduce that after the update. But that, along with some custom roll paper sizes I didn't need to keep, were preserved after the update.
After this update I made a print of one of my photos on EEF, 17x22 inch sheet. The print is fine, and since I checked the "Center Image" checkbox in the driver, the print is considerably off-center, as is the norm, so the update didn't fix an obvious flaw. With that box checked, my 21 inch wide photo has a .25 inch left margin, and a .75 inch right margin (landscape orientation). Pretty much what I've come to expect.
Prior to the update I'd made ten letter-sized prints for a client, and a 43 inch wide panorama on 17 inch roll paper. After the update and my 17 x 22 inch print, the LK ink is still showing 1% remaining. My recent nozzle checks have shown no clogs, so there have been no cleanings lately.
--Jay
I've wrapped up those print jobs. I will be working on another later this week. I also need to make a couple of prints of my own work for a gallery show that will hang next week. So today I installed both updates. I did nothing but run the installers, hoping the old versions of the software would be found and replaced. That seemed to be the case with the Remote Panel 2 software; after installing, its version appears as 1.30, just as I expected from Epson's meager release notes. As for the driver, I'm really not sure. The previous version was 8.65, the update being 8.66. I ran the installer and then checked the version in the Mac's Print and Fax preferences panel. That still shows 8.65.
But checking Epson's "Printer Utility 4" (one could ask for more useful application names!), I get a mixed message as shown in the screen shot here. I have no idea what's up with Epson's versioning, and I have no idea what I've got after installing that update. Do I have 8.65? 8.66? Some weird hybrid, parts of each? Beats me. Epson, you could have done a couple of things here to help out. Installation instructions would be a good start. Just telling me whether the printer should be removed and then installed from scratch with the new driver, or to install the new driver "over" the old one, would have been sufficient.
Friend Dean, who runs his 7900 from Windows 7, warned that installing Epson's updates deleted any custom paper sizes he'd created. With that in mind I copied the information from the only custom sheet size I've created so I could reproduce that after the update. But that, along with some custom roll paper sizes I didn't need to keep, were preserved after the update.
After this update I made a print of one of my photos on EEF, 17x22 inch sheet. The print is fine, and since I checked the "Center Image" checkbox in the driver, the print is considerably off-center, as is the norm, so the update didn't fix an obvious flaw. With that box checked, my 21 inch wide photo has a .25 inch left margin, and a .75 inch right margin (landscape orientation). Pretty much what I've come to expect.
Prior to the update I'd made ten letter-sized prints for a client, and a 43 inch wide panorama on 17 inch roll paper. After the update and my 17 x 22 inch print, the LK ink is still showing 1% remaining. My recent nozzle checks have shown no clogs, so there have been no cleanings lately.
--Jay
Monday, January 2, 2012
Busy, But Not Busy Printing
My 7900 has been sitting idle for a while, but I have not. A few days before Christmas I picked up an art repro job, which in the end will require photographing a series of oil-on-canvas paintings, and then assembling and color-correcting the captures. I've no interest in printing on canvas, so the client will have the files I provide printed elsewhere, perhaps at a printing service in Polson, MT, the town nearest to where I live. But when doing this kind of job I print a series of proofs, which I use to verify the color correction work. The proofs are letter-size sheets, quick, simple printing jobs.
My panorama client found the last print I made for him was damaged, most likely in shipping (thanks very much, USPS), so I made another print and shipped it last Tuesday. USPS said it would arrive Thursday (via Priority Mail). It did not, and had not arrived as of Saturday. The Post Office is closed today. If the print hasn't arrived after tomorrow's delivery, I'll be making yet another copy of the 43 inch long bleeding hearts pano shown in my previous (18 December) posting.
I received my order of ink and paper before Christmas. Printing the proofs and the pano have moved the LK ink down to 1%.
Epson has released an updated Mac driver, and also an update for the LFP Remote Panel 2 utility. Epson's release notes are typically terse, but apparently these are very minor updates. I haven't had time to install them.
I ran across this posting on the Luminous Landscape Printers, Papers, and Ink forum. Some of the comments are interesting. This is the sort of information I didn't find when I did my research prior to buying the 7900, leading to the creation of this blog.
I need to print a couple of my own pieces for a show coming up later this month. I'll get that done as soon as I wrap up some of the paying jobs!
--Jay
My panorama client found the last print I made for him was damaged, most likely in shipping (thanks very much, USPS), so I made another print and shipped it last Tuesday. USPS said it would arrive Thursday (via Priority Mail). It did not, and had not arrived as of Saturday. The Post Office is closed today. If the print hasn't arrived after tomorrow's delivery, I'll be making yet another copy of the 43 inch long bleeding hearts pano shown in my previous (18 December) posting.
I received my order of ink and paper before Christmas. Printing the proofs and the pano have moved the LK ink down to 1%.
Epson has released an updated Mac driver, and also an update for the LFP Remote Panel 2 utility. Epson's release notes are typically terse, but apparently these are very minor updates. I haven't had time to install them.
I ran across this posting on the Luminous Landscape Printers, Papers, and Ink forum. Some of the comments are interesting. This is the sort of information I didn't find when I did my research prior to buying the 7900, leading to the creation of this blog.
I need to print a couple of my own pieces for a show coming up later this month. I'll get that done as soon as I wrap up some of the paying jobs!
--Jay
Sunday, December 18, 2011
Granularity
![]() |
| Printed photo © Stephen E. Ross. |
While doing this I didn't notice anything unusual on the 7900's LCD. For some time it's been showing three inks, C, VM, and LK, as low, flashing a warning icon above each color on the display. This icon appears when the ink level drops below 20%. I have occasionally looked at the ink levels in the status display. Most of the inks are in the 30%—40% range. This should last quite a while considering the number of prints I'm likely to make over the next several months. The three colors flashing the warnings have been in the low teens each time I've checked, and are clearly the ones I'll need to replace soonest.
Since making the panoramic print I've not needed the printer. When it sleeps the LCD turns off, but the low ink LED continues to flash. Unless I'm setting up to make a print, I generally don't pay much attention. Apparently one learns to ignore the presence even of something as large as the 7900.
Today I was quite surprised to learn that the LK ink level was at 2%. I don't recall it's level the last time I looked at the status menu on the LCD or the printer utility on the computer, but I'm sure it was 8%, maybe 9%. I'd guess that was a week or perhaps ten days ago. In any case, I need to order ink right now.
What's interesting about all of this is the granularity of ink level, and remaining maintenance cartridge capacity, as reported by the 7900. Unless and until I learn otherwise, I'll assume these levels are reported fairly accurately. My Canon iPF 5000 reported these data in 20% increments. When a new ink tank was installed, the printer's LCD would display a "full bar" for that color, and the status report would show 100%, just as one would expect. However, neither the bar nor the status report would change until the ink level dropped to 80%. Then, the bar would shorten by two pixels, and the printed status report would show 80%. These would not change again until the level had dropped to 60%. This limited the usefulness of the information. Once the level reached 20%, there was no way to know when the level had dropped to a point where one should order ink. To be fair to Canon, a later firmware update added a new "level", helpfully shown as "replace soon". I operated that printer long enough to learn when, during the period between 20% and "replace soon", to order ink.
The Epson's 1% granularity is nice, but I need to develop the habit of checking ink status a little more regularly. The LK seems to have dropped suddenly, or rapidly, from the high single digits to 2%. That could indicate some kind of problem, but it's more likely I simply missed seeing levels in between.
--Jay
Subscribe to:
Posts (Atom)




